If you need a new shingle roof in Ortley, here's what matters: fiberglass mat construction with ceramic granulated coating for UV protection and fire rating. Architectural shingles carry a Class A fire rating and wind resistance ratings up to 130 mph. Ortley Roofing & Maintenance helps you pick the right shingle for your home and budget.
We install every shingle roof to manufacturer specifications. That means 4-6 nails per shingle in the designated nailing zone, proper offset between courses, starter strips along the eave, and ridge cap shingles at every hip and ridge. When the manufacturer inspector shows up, your roof passes.
Our Shingle Roofing Process
Consultation & Inspection
We inspect your existing roof deck and sheathing, measure the area, and help you choose between architectural and three-tab asphalt shingles. Color samples brought to your Ortley home.
Strip & Inspect
Old roof stripped to bare deck. We inspect the plywood or OSB sheathing for structural integrity, replace any compromised boards, and prep a clean, solid substrate for the new underlayment and shingles.
Underlayment & Flashing
Ice-and-water shield bonded at valleys and eave lines. Synthetic underlayment over the full deck. New aluminum drip edge at every eave and rake. All flashing — chimney, pipe, vent, wall — sealed and secured before a single shingle goes down.
Shingle Installation
Starter strips along the eave, then field courses of architectural shingles with manufacturer-specified offset and overlap. Each shingle nailed in the designated zone with 4-6 fasteners. Ridge cap shingles hand-nailed at every hip and ridge for a finished, watertight top.
What Ortley Customers Say
"From the first phone call to the final walkthrough, everything was seamless. The team was courteous and efficient. Already recommended them to two friends."
"We called expecting to wait days, but they were here the same afternoon. Fair pricing, quality work, and they kept us informed every step of the way."
"Responded fast and got the job done right the first time. Crew was polite, professional, and cleaned up everything. Would absolutely hire again."
Why Choose Ortley Roofing & Maintenance for Shingle Roofing?
Full Tear-Off Standard
We strip to the deck on every shingle job. No overlay shortcuts. Your underlayment, ice-and-water shield, and flashing are installed on a clean, inspected roof deck.
Proper Flashing at Every Penetration
Chimney flashing, step flashing, pipe boots, vent boots, valley channels — every transition sealed with waterproof sealant and proper overlap. Flashing failures cause 90% of roof leaks.
Manufacturer-Certified Installers
GAF Master Elite, Owens Corning Preferred, CertainTeed SELECT ShingleMaster. Our certifications mean your manufacturer warranty is fully valid from day one.
Nailed to Manufacturer Spec
Every shingle nailed in the designated nailing zone with the correct number of fasteners. This is what keeps the manufacturer warranty valid and the shingles on your roof in high wind.